O'Brien 45 tonne Lifting Beam
 O'Brien Installations Ltd. has recently designed & manufactured a 45 metric tonne Cap. Lifting beam, used to lift paper rolls for a company in the pulp & paper Industry. This lifting beam was designed to ASME B30.20-3003.
|
O'Briens Manufactures and Installs 8th Crane for Salit Steel
 Our 8th O'Brien dual hoist outdoor overhead crane installed at Salit Steel, located in Niagara Falls, Ontario. All Eight cranes are a C.M.A.A. Class "D" duty rating.
|
2 O'Brien 40 Ton Over Head Cranes
 Two (2) 40 Ton Capacity C.M.A.A. Class "D", 69'-0" span O'Brien Overhead Cranes manufactured in O'Briens Stoney Creek Plant and installed in a large steel fabricating facility located in the Niagara Penninsula.
|
O'Brien Cleaning Line Crane.
 O'Brien Installations Ltd. has completed the fabrication of a 7 Ton Capacity Cleaning Line Crane, installed in a wire producing plant located in North Eastern United States. This Crane typically runs on a three (3) shift basis, in a very extreme enviroment.
|
Automotive Stamping Plant
O’Brien Installations Ltd. has completed the manufacturing and installation of two 25 ton double girder O’Brien Overhead Cranes, for an automotive stamping plant in Southwestern Ontario.
The project also included 330 ft of runway which was fabricated by O'Brien Installations. The cranes will handle all incoming and out going coils.
|
Heavy Machine Fabrication
O'Brien Installations Ltd. has completed the fabrication and installation of one 40 ton double girder crane with a 12 ½ ton auxiliary hoist for a heavy machine fabricator in the Niagara Region.
The O'Brien Crane has a custom Street VX Open Winch Hoist. The O'Brien Crane, which has a span of 60 ft., is also radio controlled. This crane will be used to handle large weldment during the fabrication process.
|
Injection Molding Company
O’Brien Installations Ltd. has completed the manufacturing and installation of two O’Brien Cranes, 20 & 10 ton capacity, at a injection molding company in Mississauga, Ontario.
The cranes and runways were installed to convert the building from a distribution centre to a manufacturing facility. Over 600 feet of runway system and floor mounted columns were installed for this project.
|
New Brunswick Power Corp.
O'Brien Installations has completed the largest crane in the company's history. The crane will be used to erect a new emissions scrubber system - a series of industrial filters to remove carbon - base and other emissions.
Two electric motors attached to hoists on the crane will be able to haul 108 tonnes up a vertical lift of more than 60 meters (196.8 ft) The crane's height is about 75 m (246 ft) off the floor. Other features include: 120 ton capacity, hoisting speeds UFD controlled, radio controlled operation (Jay Electronique)and 72.8 m (239 ft) floor to rail height.
|
