O'Brien
45 tonne Lifting Beam
 O'Brien
Installations Ltd. has recently designed
& manufactured a 45 metric tonne Cap.
Lifting beam, used to lift paper rolls for
a company in the pulp & paper Industry.
This lifting beam was designed to ASME B30.20-3003.
|
O'Briens
Manufactures and Installs 8th Crane for
Salit Steel
 Our
8th O'Brien dual hoist outdoor overhead
crane installed at Salit Steel, located
in Niagara Falls, Ontario. All Eight cranes
are a C.M.A.A. Class "D" duty rating.
|
2
O'Brien 40 Ton Over Head Cranes
 Two
(2) 40 Ton Capacity C.M.A.A. Class "D",
69'-0" span O'Brien Overhead Cranes manufactured
in O'Briens Stoney Creek Plant and installed
in a large steel fabricating facility located
in the Niagara Penninsula.
|
O'Brien
Cleaning Line Crane.
 O'Brien Installations Ltd. has
completed the fabrication of a 7 Ton Capacity
Cleaning Line Crane, installed in a wire
producing plant located in North Eastern
United States. This Crane typically runs
on a three (3) shift basis, in a very extreme
enviroment.
|
Automotive
Stamping Plant
O'Brien Installations
Ltd. has completed the manufacturing and
installation of two 25 ton double girder
O'Brien Overhead Cranes, for an automotive
stamping plant in Southwestern Ontario.
The project also included 330 ft of runway
which was fabricated by O'Brien Installations.
The cranes will handle all incoming and
out going coils.
|
Heavy
Machine Fabrication
O'Brien Installations Ltd. has completed
the fabrication and installation of one
40 ton double girder crane with a 12 ½ ton
auxiliary hoist for a heavy machine fabricator
in the Niagara Region.
The O'Brien Crane has a custom Street VX
Open Winch Hoist. The O'Brien Crane, which
has a span of 60 ft., is also radio controlled.
This crane will be used to handle large
weldment during the fabrication process.
|
Injection
Molding Company
O'Brien Installations
Ltd. has completed the manufacturing and
installation of two O'Brien Cranes, 20 &
10 ton capacity, at a injection molding
company in Mississauga, Ontario.
The cranes and runways were installed to
convert the building from a distribution
centre to a manufacturing facility. Over
600 feet of runway system and floor mounted
columns were installed for this project.
|
New
Brunswick Power Corp.
O'Brien Installations
has completed the largest crane in the company's
history. The crane will be used to erect
a new emissions scrubber system - a series
of industrial filters to remove carbon -
base and other emissions.
Two electric motors attached to hoists on
the crane will be able to haul 108 tonnes
up a vertical lift of more than 60 meters
(196.8 ft) The crane's height is about 75
m (246 ft) off the floor. Other features
include: 120 ton capacity, hoisting speeds
UFD controlled, radio controlled operation
(Jay Electronique)and 72.8 m (239 ft) floor
to rail height. |
