These Rigid Mount Trolleys are designed especially for use with lug suspended hoists. The trolleys attach directly to lug brackets on hoists, thereby forming integral trolley-hoist combinations, offering close headroom dimensions-making the trolley-hoist ideal for hoisting applications where distance from floor to Ibeam is limited.

The trolleys are of all steel construction to provide maximum strength.Wheels have hardened treads, insuring long life, and operate on ball bearings for easy travel.

On hand geared models, the hand chain operated wheel turns a pinion which meshes with wheel gears for ease of operation and accurate spotting. The chain guide keeps the chain aligned with the wheel and helps prevent fouling. The wheel gears and drive pinion have machine cut teeth. Anti-tilt rollers are provided on hand geared trolleys, as well as the 1-ton push type for extended hand chain wheel hoist, to eliminate tilting of trolley on beam when operating with light load or without load.

BUDGIT I-BEAM Trolleys expand the usefulness of BUDGIT Hand Chain Hoists...providing a quick, easy way to lift and transport materials from place to place. In either Push or Hand Geared Type, BUDGIT Trolleys require little effort to traverse even when loaded to capacity.

Frames: Deeply embossed steel sideplates on the 1/4 through 2 ton models provide a high strength to weight ration. Sideplates are of wraparound design providing a full face bumper as well as a protective lug which will prevent trolley from falling off I-beam in event of inadvertent wheel axle failure. The 3 ton trolley sideplate frames are thick rolled steel sections with added bumpers.

Wheels: High-quality pressed steel wheels, carburized and hardened to ensure long life, are offered on the standard trolleys. Spark resistant models have beryllium copper wheels. The wheels have built-in ball bearings to provide smooth easy rolling motion and compound tread design to make them suitable for operation on wide flange beams as well as American Standard I-beam tapered flange beams. Deep flanges help prevent wheels from climbing the track.

Cross Pin: The cross pin connects the sideplates and provides equalized wheel loads. It has a center located hood saddle groove designed for mounting hook suspended hoists...permitting the closest possible headroom. Each trolley is easily adjustable to fit several sizes of beams by simply shifting cross pin spacer washers from inside to outside of trolley sideplate.